4-Isobutylbenzeneboronic acid - Names and Identifiers
4-Isobutylbenzeneboronic acid - Physico-chemical Properties
Molecular Formula | C10H15BO2
|
Molar Mass | 178.04 |
Density | 1.02±0.1 g/cm3(Predicted) |
Melting Point | 117-120°C |
Boling Point | 306.5±35.0 °C(Predicted) |
Flash Point | 139.2°C |
Vapor Presure | 0.000335mmHg at 25°C |
pKa | 8.62±0.10(Predicted) |
Storage Condition | 2-8°C |
Refractive Index | 1.509 |
4-Isobutylbenzeneboronic acid - Risk and Safety
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R40 - Limited evidence of a carcinogenic effect
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S36 - Wear suitable protective clothing.
S22 - Do not breathe dust.
S60 - This material and its container must be disposed of as hazardous waste.
S37 - Wear suitable gloves.
|
HS Code | 29319090 |
Hazard Class | IRRITANT |
4-Isobutylbenzeneboronic acid - Introduction
Nature:
-Appearance:(4-Isobutylphenyl)boronic acid is a colorless to slightly yellow crystalline solid.
-Melting point: About 70-75 degrees Celsius.
-Solubility: The solubility of water is lower, and it is easier to dissolve in organic solvents such as alcohol, ether, etc.
-Chemical properties:(4-Isobutylphenyl)boronic acid is an organic acid that can release boric acid ions in aqueous solution. It also has the characteristics of acid catalysis, which can promote the progress of some organic reactions, such as the synthesis of organic compounds and catalytic organic reactions.
Use:
- (4-Isobutylphenyl)boronic acid is commonly used as a reagent for organic synthesis and is used to synthesize various organic compounds. It can catalyze esterification, etherification, boric acid esterification and other reactions.
-In unspecified chemical processes,(4-Isobutylphenyl)boronic acid is also used as a precursor for organic synthesis catalysts.
Method:
- (4-Isobutylphenyl phenyl)boronic acid can be prepared by reacting 4-Isobutylphenyl nickel and boric acid under reaction conditions.
Safety Information:
- (4-Isobutylphenyl)boronic acid dust may cause irritation to eyes, respiratory tract and skin, so care should be taken to avoid inhalation, contact with skin and eyes.
-Wear appropriate protective gloves, glasses and masks during use.
-In case of contact with skin or eyes, rinse immediately with water and seek medical attention.
-Store properly and avoid contact with incompatible substances.
Last Update:2024-04-09 20:49:11